Apple’s AirPods “only work” with the iPhone thanks to the W1 chip, but it’s also a standard Bluetooth headset. That means it can work with any device that supports Bluetooth audio, even Android phones.
The pairing process won’t be as easy as pairing with an iPhone, and the connection may be uncertain, but they should work with anything from Android phones or Windows computers to other Apple devices. like Apple TV. If paired with a Mac or iPad, the process will be easier.
Table of Contents
1. Put AirPods in pairing state
To put AirPods in pairing mode, here’s what you need to do:
Place the AirPods in the charging case.
Open the lid of the box, you will see the light pop up, indicating the battery charging status.
Press and hold the round button on the back of the AirPods case. The light inside the box will start flashing white. This indicates that your AirPods are in pairing mode.
While the white light is blinking, other devices can see the AirPods. In other words, they will appear as peripherals that can be paired from the Bluetooth settings, just like any other Bluetooth headset or speaker.
2. How to connect AirPods to Windows 10
Pairing AirPods with a Windows 10 PC will require a few more steps, but shouldn’t take more than a minute.
Pair AirPods with Windows 10 PC for the first time
On a PC, open the Settings app > select Devices from the main menu.
Select Bluetooth & other devices > Add Bluetooth or another device.
On the Add a device > Bluetooth window.
Place the AirPods in the box and open the lid. Press and hold the button on the back of the case until you see the status light between the two AirPods start to flash white, then let go. Your AirPods will show up in the Add a device window. Click here to pair and connect.
Once connected to the device, AirPods may automatically reconnect, but it will prioritize the phone or tablet. Therefore, the next time you use AirPods and it does not automatically pair with Windows 10, do the following:
In Settings > Bluetooth & Other Devices > under Audio > select AirPods > click Connect.
If you don’t see Bluetooth options after a while, your AirPods may have exited pairing mode and you’ll see a blinking white indicator light. Just press and hold the circle setup button again and the AirPods will return to pairing mode.
Once they’re connected, the AirPods will work like regular Bluetooth headphones with whatever device they’re paired with.
3. How to Pair AirPods with Mac or iPad
If you’ve paired your AirPods with your iPhone, this pairing status will sync between your iPhone and any iPads and Macs where you’re signed into your account, thanks to iCloud. To do this, users must sign in to their iPad or Mac with the same Apple ID used on the iPhone. For Macs, the user must enable Handoff.
Older Macs that don’t support Handoff can’t use this easy pairing process, and you’ll have to pair it using Bluetooth. This pairing state also doesn’t sync with Apple TV, so you’ll have to use Bluetooth to pair your AirPods with Apple TV.
If everything is set up properly, the user can simply select the AirPod just like any other audio device from an iPad or Mac. First, make sure the AirPods case is open, the AirPods are taken out of the box, or you are wearing it. If they’re in the box and closed, you won’t be able to select them as an audio device option.
On iPad, open Control Center, tap the sound wave icon in the top-right corner of the music controls, or press and hold the music control, then tap the device switcher icon and select AirPods from the list. audio devices.
On a Mac, click the volume icon in the Mac’s menu bar and select AirPods from the list of available devices, or go to Apple menu > System Preferences > Sound and select AirPods . You can also enable the volume icon on the Mac menu from here by checking the ” Show volume in menu bar ” box, if the dialog is not already enabled.
4. How to pair AirPods with another device
To pair your AirPods with any other device or older Mac, simply find the easy pairing button on the AirPods charging case. Look at the back of the AirPods case. See the matte silver circle near the bottom, just above the Lightning port? It’s the “setup button” you need to pair your AirPods with other devices, used when the W1 can’t pair with other devices automatically.
For example:
Android: Go to Settings and tap the ” Bluetooth ” option under Wireless & networks. Make sure Bluetooth is turned on and you’ll see AirPods as an available device here.
Windows 7: Go to Control Panel > Hardware and Sound > Devices and Printers > Add a device, then select AirPods.
Mac: Click the Apple menu and go to System Preferences > Bluetooth. Select AirPods in the list and click ” Pair “.
Apple TV: Navigate to Settings > Remotes and Devices > Bluetooth. Select AirPods in the list.
Other devices: Simply navigate to the Bluetooth settings screen, where you can view and connect Bluetooth devices. AirPods will appear as an option here like any other Bluetooth headset.
5. How to Reconnect AirPods to iPhone or iPad
AirPods will be disconnected from iPhone after pairing them with a non-iOS device. You will need to reconnect them to your iPhone to use them again.
To do this, first put the AirPods back in the box. Go to the iPhone home screen, unbox the AirPods, and place it near the iPhone. (This process also works on iPad, if you want to pair AirPods with iPad instead of iPhone.)
You will see the message ” Not Your AirPods ” appear on the screen. Click ” Connect “. You will then be prompted to press and hold the circular button on the back of the box. Release the button when “ Connecting ” appears on the screen and they will automatically reconnect to the iPhone.
If you want to own MacBook and Airpods products at attractive prices, don’t forget to check out discount codes and promotions from reputable websites.Using a coupon or discount code will save you a considerable amount of money. Be a savvy shopper.
